Garage door bending causes your garage door to look like it’s playing peek-a-boo. It is a serious sign that something is deeply wrong. Addressing a warping, bending, or sagging garage door quickly is essential for preventing long-term damage. But what causes the bend in the first place?
Garage Door Bending Due To Bad Weather
Snow is heavy, and the wind is strong. The environment is capable of throwing lots of pressure on your garage door, and there’s only so much it can take. Thankfully, if a blizzard causes some dents or a misalignment, you likely don’t need a whole new door — just some professional repair.
Low Quality Causes Garage Door Bending
It’s just as the old adage says: “you get what you pay for.” A cheap garage door is most likely made out of thin, flexible metal that can’t handle the rigors of actually being a garage door. If this is the issue, the only solution is to replace the door with one made from hardier materials, such as thick aluminum or steel, fiberglass, or vinyl.
Uneven Tracks
Both door tracks need to be perfectly aligned. If they aren’t, the door will experience lots of stress and bend, break, or come off the tracks. Fortunately, you can get a professional technician to realign the tracks.
Garage Door Bending Caused By A Huge Impact
This one’s pretty obvious. If someone hits the door with a car, that can certainly bend it.
A Lack of Lubrication
Garage doors use lots of moving metal parts. Without lubrication, these will rub and grind against each other. This causes friction and leads to parts moving at different rates or not at all. The rollers, hinges, and tracks all need lubrication periodically and inspection for rust.
Poorly Installed Arm Causes Garage Door To Bend
The arm is what transmits the power from the motor to the door itself and looks like a large metal “L.” If it’s at a bad angle or installed in the wrong direction, it can bend the door rail.
Lack of Struts
Without struts to support them, garage door panels can be surprisingly bendy. Rigidity is essential for avoiding a bent door, so make sure your door has adequate reinforcing struts.
The Door Frame Isn’t Square
If the garage door is installed in an uneven or un-square frame, it will never line up properly. Unfortunately, the only solution is to rebuild the frame.
Unbend Your Garage Doors With Professional Service From Larry Myers
Garage doors work in a delicate balance. Without proper maintenance and repair, they can quickly become damaged and unusable. Get the expert’s touch by contacting Larry Myers Garage Doors. Our technicians will get you on a schedule for regular maintenance and keep your garage doors working smoothly.